MediaTek VCOM driver is essential if you want to send MediaTek device with the flash tool SP. If it is not installed simply that you can not use the SP intermittent tool in their flash devices MTK. In this discussion, I'll show you how to install VCOM driver on Windows PC. The time you are in Windows 8, 8.1 or 10, the procedure is basically the same.
First, you need to disable the application of the signature of MediaTek driver that the driver has not been signed and will not be installed without disabling the application of the driver's signature.
How to disable the driver signature enforcement in Windows 8, 8.1 and Windows 10
Pressing the Shift key and restart your computer, hold down shift until a blue color, choose an option screen.
Otherwise, go to PC Settings from the Start >> >> Update and recovery Recovery menu.
Advanced Start, click Restart now.
Your PC will make a sort of reboot and go to a blue screen select an option. Click Troubleshooting (update or restore your PC or use advanced tools) >> Advanced >> boot parameters (behavior change windows startup list) >> Restart.
The PC will restart and go to another blue screen with 10 options. Press 7 or F7 on the keyboard to select an application to disable driver signing.
Your computer will automatically restart again and you can now install the USB Preloader MediaTek VCOM driver for Windows 7/8 / 8.1 / 10.
How to install the USB VCOM Mediatek preload Windows 8 / 8.1 and Windows 10
Download and extract MediaTek VCOM USB drivers for Windows 8, Windows 8.1 and Windows 10
Go to Action >> Device Manager >> Add inherited material as shown below.
Select Install hardware manually select from a list and click Next
Select Show All Devices and click Next
On the next screen, click Disk in the lower right corner and go to the extracted drivers on your computer. The drivers you need are in the Windows folder 7. To select x64 x86 PC and PC usb2ser_Win764.inf usb2ser_Win7.inf use and click OK
Once the driver is loaded, select USB VCOM MediaTek preload on the next screen and click Next.
A red error that says Windows can not verify the publisher of this driver software appears. Select Install this driver software anyway and the installation of MediaTek Preloader driver begins.
Now you can switch to flash your Android-based phone easily using MTK SP Flash tool.
After successful installation, I get the error - This device can not start. (Code 10), simply ignore
If you have any questions, please use the comment box below.
No comments:
Post a Comment